Custom-made copper tray flexible connection flexible soft copper row new energy battery copper bar connection
- Copper Content99.9%
- Sleeves Type
- Current Rating100A to 6000A
- Surface PlatingTin or Nickel Plated etc
- Production Process
RHI Electric Co.,Ltd Focus on the production and R & D of soft PVC impregnated protective sleeve and new energy battery connection accessories.
The copper wire soft connection can be used for transformer installation, high and low voltage open cabinet, vacuum electric appliance, closed mother slot, generator and bus, rectifier equipment, connection between rectifying cabinet and isolation switch, and connection between busbar. It can improve the conductivity, adjust the installation error of the equipment, at the same time, play the role of compensation, and facilitate the test and equipment maintenance.
The copper laminate laminated part is pressed together by molecular diffusion welding and formed by large current heating and pressure welding.
Material: high quality T2 red copper.
Customers can provide special width, length and drilling, tin plating or silver plating on contact surfaces, and can be processed according to user requirements. Widely used in high and low voltage electrical appliances, vacuum electric appliances, high and low voltage switchgear, electric welding machines, cars, electric locomotives, electric furnaces, mine explosion-proof electrical appliances, generator sets, soft connections of carbon brushes.
1、The process flow of copper strip soft connection：Standard material selection,→mould making→blanking→cleaning and stacking→acid washing→ surface treatment→heat preservation→melting→sawingcleaning burr→drilling→surface polishing→conductive surface tin plating→plastic→packaging→warehousing
2、 The process of melting and casting of copper and aluminum soft belt transition joint: the good material is cleaned well in the heat preservation furnace according to the technical standard. The temperature reaches about 600 degrees, then it is taken out, then the special solvent is put into the mold, then the molten metal (temperature at about 1200) is injected into the mold, and the high speed solution is melted into the mold. Integral forming, after casting solidification, you can remove the mold and take it out. 。
Any size can be customized, welcome to consult!